NanLite PavoTube RGBWW LED Tubes are an amazingly versatile lighting fixture that features 0 to 100% dimming with maximum illumination of 2850 lumens per tube (the 2 tubes in this kit produce 1218 Lux @ 1m when combined) at 5600K, as well as a full spectrum RGBWW and pre-programmed special lighting effects. With the color temperature adjustable from 6500-2700K, a CRI of 98 and a TLCI of 95 this device meets most studio lighting needs. It also features a choice of over 360 static light colors on the RGBWW spectrum and can cycle through the entire spectrum at a speed of your choice.
With six pre-programmed special effects in a simple-to-master menu system, this NanLite RGBWW light tube makes it easy to imitate lighting scenarios that can otherwise be tricky to recreate. At the touch of a button, you can simulate the lighting effects of an emergency services vehicle (cop car), flame (candlelight), lightning storm, an SOS signal, and two different types of continuous flicker/flash. Each of the special effects has many different settings to help you refine it and create precisely the effect you need, as well as an LCD panel showing you exactly what settings you're using, making it easy to fine tune and then recreate them in future.
With easy-to-use dials and buttons set into one end of the light tube, as well as built-in 2.4ghz radio control and master/slave functions, this RGBWW tube light is versatile enough to slot right into your existing set up without needing a lot of extra preparation. This light’s master/slave mode also makes it easy to synchronize multiple lights by chaining them together using the included sync cable to create a powerful bank of lights performing synchronized effects.
Perfect for use in the studio or on location, this lightweight tube is available in 2-foot and 4-foot lengths. Both length variants are 1.9 inches in diameter making them T12 compatible. It can be powered using the included AC adapter, and also has two built-in 2200MaH batteries for use where no mains power supply is available. Supplied in a padded carrying case complete with all the accessories you need to get going, including mounting clips for adapting your light to a tripod or the wall. The light itself has octagonal ends, allowing it to be placed on the floor or a surface at a specific angle to give you maximum control over the finished effect of the lighting.
Both 2-foot and 4-foot variants are available as single lights as well as two light and four light kits
What's In The Box
1x Nanlite PavoTube II 30C
1x Power Adapter with 3.28-Foot (1m) Cable with Right-Angle Connector
1x Power Cable 9.84-Foot (3m)
1x HD-T12-1-C Transparent Tube-Mounting Clip
2x Steel Safety Wires
1x Padded Carrying Bag
Recently viewed
Alberta Living Wage Employer
The Camera Store is a proud member of the Alberta Living Wage Network
Our Expert Staff are Ready to Help
Give us a call for advice at 403-234-9935. Click here for more contact info.
Affirm - Pay Over Time
Spread the cost of your purchase into 3, 6, or 12 easy payments. Click here for full details.